Planter Reduce The Amount Of Fertilizer, Fertilizer Time, Improve Work Efficiency

- Jun 22, 2017-

The no-till planter is a traction structure that supports the weight of the seeder through two wheels and drives the seed and the fertilizer. The working principle of the no-till planter is that the weeds and straws are cut off through the front plow disc and the depths of the grooves are opened on the soil, followed by a double disc opener in the back The soil to re-open a kind of fertilizer ditch, seeder will seed into the ditch at the end, the fertilizer will be applied to the ditch at the end of fertilizer. And then let the suppression of the casing after the suppression of casing. The formation of the virtual under the real bed conditions.

No-tillage planter in addition to the traditional planter ditching, fertilization, planting, casing and repression function, but also has a good grass removal function, stubble into the soil function, fertilizer and other functions. After specially designed no - tillage planter, rack and working parts are rugged, heavy, and stubble.

The plow pole is staggered so that the distance between the opener is large, the design has special fertilizer, anti-blocking device, etc., there is a special fertilizer fertilizer device to ensure that there is enough distance between the seed and fertilizer Large amount of fertilizer does not burn seeds.

No-tillage planter consists of three parts: the front is the ditch section, its role is to plow the soil, digging sowing ditch. The middle is fertilization, sowing part of the front ditch after the back fertilization, sowing, planting and fertilization depth can be adjusted, the last part is the repression part, play the role of soil moisture.

One is in accordance with the instructions, the planer installation and commissioning, to use the technical requirements.

Second, before planting should first look at the block situation, such as the size of the block, the ground shape, concentration and availability of obstacles, so be aware of, to ensure the quality of operations and crew safety. Put the seed fertilizer on the ground appropriate place, reduce the amount of fertilizer, fertilizer time, improve work efficiency.

Third, the sowing unit should be in the work trip to avoid parking, must be stopped to prevent the emergence of seedling "broken bar" phenomenon, the sowing machine should be raised, back a certain distance, and then continue to sow. When the planter is lowered, it will drop when the tractor is slowing forward. The harvester can not retreat after entering the ground, so as not to block or damage the opener.

4. When the ground turns, you should hang the planter or raise the opener and soil working parts, cut off the power of the seed and the fertilizer, raise the stacker before turning.

Five is the seed must be clean, dry, not mixed with straw, stones, to prevent clogging row mouth, affecting the amount of row.

6. Is the machine in the work should always observe the work of the various components of the sowing machine is normal, in particular, should pay attention to whether the seeder selection, whether the blockage of the tube, the opener is blocked by wet soil, casing repressor Whether the work is normal.

Seven is to broadcast a crop, to carefully clean up the seed box, so as to avoid seed mixed caused by row failure. Fertilizer boxes should be cleaned after use to prevent the machine corrosion.

Eight is the sowing of the remaining seeds to be properly handled, strictly prohibited to prevent human and animal poisoning.

9. After the use of properly kept, for those spare parts, wearing parts, easy to lose pieces and their random with the special tools to be properly kept.

10. Is the planter should be placed in a dry shed, not with some fertilizers, pesticides or alkaline acids and other corrosive chemicals placed together.