Planter Regular Repair Or Replacement

- Oct 25, 2017-

The drive chain of the planter, the seeder drive sprocket shaft hole, the ground wheel bearing, the plow knife disc hub bearing, the double disc opener bearing, the drive shaft bearing, etc. should be in accordance with the instructions specified in the lubricating oil Time to lubricate.

Check the tightening of the bolts on the chain and remove the dirt on the chain and check the aging and damaged parts for maintenance or Replace the use of paint to cover the scraper on the scratches, rupture and damage to prevent metal corrosion.

When the sowing machine is used, the residual seeds and fertilizer should be thoroughly removed. Stuck in the seed box of the seeds will be germinated or mildew, plug the seed metering device, and fertilizer will be consolidated in the fertilizer after the fertilizer, can not be used normally, while the fertilizer on the metal fat box corrosive; The machine is placed in places where children do not often play; placing it in the room can prolong life, if placed outside the application of the tarpaulin cover.

First, according to the instructions, the planer to install and debug, to use the technical requirements.

Second, before planting should first look at the plots, such as the size of the land, the ground shape, concentration and availability of obstacles, so be aware of the quality of work and to ensure safety. Put the seed fertilizer on the ground appropriate place, reduce the amount of fertilizer, fertilizer time, improve work efficiency.

Third, the sowing unit should be avoided in the work trip to stop, must be stopped to prevent the emergence of seedling "broken bar" phenomenon, the sowing machine should be raised, a certain distance back, and then continue to sow. When the planter is lowered, it will drop when the tractor is slowing forward. The harvester should not retreat after entering the ground, so as not to block or damage the opener.

Four, is the ground turn, the sowing machine should be suspended or the opener and soil working parts rise, cut off the seed and the row of fertilizer power, lift the drawer, and then turn.

Fifth, the seeds must be clean, dry, not mixed with straw, stones, to prevent clogging row mouth, affecting the amount of row.

Six, is the machine in the work should always observe the work of the various components of the sowing machine is normal, in particular, should pay attention to whether the seeder selection, feeding tube with or without plugging, whether the gap is blocked by wet soil, casing repressor Whether work is positive

Seven is to broadcast a crop, to carefully clean up the seed box, so as to avoid seed mixed caused by row failure. Fertilizer boxes should be cleaned after use to prevent the machine corrosion.

Eight, is the sowing of the remaining seeds to be properly handled, strictly prohibited to prevent human and animal poisoning.

Nine, is to be properly used after use, for those spare parts, wearing parts, easy to lose pieces and their random with the special tools to be properly kept.

10, the planter should be placed in a dry shed, not with some fertilizers, pesticides or alkaline acids and other corrosive chemicals placed together.