Planter Timely Cleaning, To Prevent The Machine Corrosion

- Aug 02, 2017-

One is in accordance with the instructions, the planer installation and commissioning, to use the technical requirements.

Second, before planting should first look at the plots, such as the size of the land, the ground shape, concentration and availability of obstacles, so be aware of, to ensure the quality of operations and crew safety. Put the seed fertilizer on the ground appropriate position, reduce the amount of fertilizer, fertilizer time, improve work efficiency.

Third, the Planter should be in the work trip to avoid parking, must be stopped to prevent the emergence of seedling "broken bar" phenomenon, the sowing machine should be raised, a certain distance back, and then continue to sow. When the planter is lowered, it will drop when the tractor is slowing forward. The harvester does not retreat after entering the slotter to avoid clogging or damaging the opener.

4. When the ground turns, you should hang the planter or raise the opener and soil working parts, cut off the power of the seed and the fertilizer, raise the stacker before turning.

Five is the seed must be clean, dry, not mixed with straw, stones, to prevent clogging row mouth, affecting the amount of row.

6. Is the machine in the work should always observe the work of the various parts of the planter is normal, in particular, should pay attention to whether the seeder selection, feeding tube with or without plug, the opener is blocked by wet soil, casing repressor Whether the work is normal.

Seven is to broadcast a crop, to carefully clean up the seed box, so as to avoid seed mixed caused by row failure. Fertilizer boxes should be cleaned after use to prevent the machine corrosion.

Eight is the remaining seeds after sowing to properly handle, strictly prohibited to prevent human and animal poisoning.

9. After the use of properly kept, for those spare parts, wearing parts, easy to lose pieces and their random with the special tools to be properly kept.

10. Is the planter should be placed in a dry shed, not with some fertilizers, pesticides or alkaline acids and other corrosive chemicals placed together.

The seeder does not sort

The main reason is that the transmission gear is not engaged, or the row of shaft head gear gear square hole wear, should be adjusted, repair or replacement.

Individual seeders do not work

The reason is that the seed row of scaffolding or seeder is blocked by the debris, should be replaced with clean seeds; row of the shaft and the individual row of the groove of the connecting pin broken,Planter should replace the pin; The board is not open and should be opened.

The seeder does not have seed

The reason is that the opener or tubing is blocked (mostly on the ground opener), clean the plug and take precautions to prevent the debris from falling into the opener.

Row of non-stop, out of control

The reason is that the separation pin of the clutch rod is disengaged or the separation gap is too small. The pin should be reloaded and locked, or the separation gap should be adjusted.

Sowing intermittent, uneven planting

The reason is that the transmission gear meshing gap is too large, the gear slip, should be adjusted; clutch spring elasticity is too weak, gear slip,Planter should adjust or replace the spring.