Planter To Ensure The Quality Of Operations And Crew Safety

- Aug 14, 2017-

The drive chain of the planter, the seeder drive sprocket shaft hole, the ground wheel bearing, the plow knife disc hub bearing, the double disc opener bearing, the drive shaft bearing, etc. should be in accordance with the instructions of the lubricants (grease) and Time to lubricate.

Check the tightening of the chain and remove the dirt on the chain and lubricate it; check the aging and damaged parts for repair or repair the parts or other parts of the chain. Replacement; use paint to cover the scraper on the scraper, rupture and damage to prevent metal rust.

When the sowing machine is used, the residual seeds and fertilizer should be thoroughly removed. Stuck in the box of seeds will be germinated or mildew, plug the seed metering device, and fertilizer will be consolidated in the fertilizer after the fertilizer, can not be used normally, while the fertilizer on the metal fat box corrosive; The machine is placed where the child does not often play; placing it in the room can prolong life, if placed outside the application of the tarpaulin cover.

First, according to the instructions, the planer is installed and debugged, to use the technical requirements.

Second, before planting should first look at the plots, such as the size of the land, the ground shape, concentration and availability of obstacles, so be aware of, to ensure the quality of operations and crew safety. Put the seed fertilizer on the ground appropriate position, reduce the amount of fertilizer,planter fertilizer time, improve work efficiency.

Third, the sowing unit in the work trip should try to avoid parking, must be stopped to prevent the emergence of seedling "broken bar" phenomenon, the sowing machine should be raised, back a certain distance, and then continue to sow. When the planter is lowered, it will drop when the tractor is slowing forward. The harvester does not retreat after entering the slotter to avoid clogging or damaging the opener.

4, is the ground turn, the sowing machine should be suspended or the opener and soil working parts rise, cut off the seed and the row of fertilizer power, raised the line device, and then turn.

Five, the seeds must be clean, dry, not mixed with straw, stones, to prevent clogging row mouth, affecting the amount of row.

Six, is the machine in the work should always observe the work of the various parts of the planter is normal,planter in particular, should pay attention to whether the seeder selection, feeding tube with or without plugging, whether the wetting device is blocked, Whether the work is normal.

Seven is to broadcast a crop, to carefully clean up the seed box, so as to avoid seed mixed caused by row failure. Fertilizer boxes should be cleaned after use to prevent the machine corrosion.

Eight, is the remaining seed after sowing to properly handle, strictly prohibited to prevent human and animal poisoning.

Nine, is to be properly used after use, for those spare parts, wearing parts, easy to lose pieces and their random with the special tools to be properly kept.

10, the planter should be placed in a dry shed, not with some fertilizers, pesticides or alkaline acids and other corrosive chemicals placed together.